Yes! Motorized DP setups are easy to integrate to the TB3.
Motorized DP Stage 0:
*NOTE: Newer DP Stage 0's are compatible, but make sure before you pick up a DP adapter. (http://store.emotimo.com/adapter-plate-to-the-dp-stage0-dolly-p22.aspx).
In addition to a motorized DP Stage 1 you will just need your TB3 and a aux stepper motor from our online store.
Motorized DP Stage 1:
In addition to a motorized DP Stage 1 you will just need your TB3 and a aux stepper motor from our online store. The DP quick release clamp will fit our stepper motors.
Just the slider:
If you don't have a fully motorized setup from DP here is what you will need to fill the gaps. We would recommend contacting DP directly (http://support.dynamicperception.com/hc/en-us/articles/201810960-How-can-I-contact-you-) to make sure these are still current for your model:
- The belt
- The end clips (these may be standard/included with the Stage 1)
- The idler pulleys/HW
- The motor’s timing pulley
*We are currently investigating backwards compatibility with spectrum and will add to our FAQ and store content shortly, thanks!