- RC007_58 that is the current shipping version of the firmware with all new units since June 2019.
- The main prior version was RC007_28 which shipped during most of 2018 and part of 2019.
A note on new firmware versions - If you interested in playing with the latest and greatest features and giving feedback to the eMotimo Team - jump on in an play with newer version. The risk of big bugs is low here unless we state otherwise. Usually we are adding and tweaking small features and adding functionality. You can always revert to prior versions as well. We do recommend you stick to RC_007_58 for production shoots unless you need a specific feature in a newer release.
To update the firmware,
- Download the .srec firmware file you want.
- copy srec file under the update folder of your uSD card so it looks like SDCARD:/update/firmwarefileiwanttoload.srec. If the card is blank you need to create the update folder.
- Insert the uSD card to the spectrum - make sure it goes in straight and is fully seated.
- Power on and wait 20 seconds - check that the new firmware flashes on the screen on startup.
- Remove and store the card for safekeeping
RC007_58 (2/20/19) - Current Version - Shipping with all new units as of June 2019
- Updated EEPROM Timing to spec to help with instance of settings not "sticking" after power cycle
- Fully enabled Jog functionality with Dragonframe 4.1. This release and beyond is officially approved by Dragonframe. The eMotimo spectrum is now the first 3rd Party Device to natively support real time shooting.
RC007_53 (1/21/19) -
- Slowed down backlash compensation on return to start for all moves.
RC007_52_2 (1/7/19) -
- BUG Fix - Fixed overrun issue with long linear moves where motor would no long change direction during set up.
RC007_52 (12/6/18) -
- Implemented delays based on Start and End Dwell times on Programmed Video for ping pong mode.
- Feathered FPS on starts to help easy back into reverse direction change for interviews. Helps with large camera setup.
RC007_50 (12/4/18) -
- Added MYT Sliders to Settings Menu
- Consolidated all slider choices to only 7 profiles
- enabled User 1 Tuning - Profile Stored to Memory - Access via Tuning option in Settings menu. This profile is then selectable on Live Motion Menu along with other standard profiles.
- Increased LeadIn/LeadOut Frames to 2000 each for SMS programming
- Revised Deadzone calcs and joystick reading routines - finer resolution for crazy intricate joystick work. Evened out velocities on both sides of joysticks.
- Fixed issue with selected Dragonframe accelerations not applying
RC007_43 (7/5/18) - API Update
- Added G215 and G216 commands to return StopA and StopB positions on request. API is published here.
RC007_42 (7/2/18) - Pano update
- Updated Pano feature to be able to shoot up to 5 minute exposures (user request)
RC007_40 (6/22/18) - Bug Fix - folder creation for SD Card writing
- Resolved Bug in LOG folder not creating correctly.
- Removing old builds from download area.
RC007_39 (6/21/18) - Working through Dragonframe Real Time interface
- Put back in Dragonframe code for V2 - see this article
- Resolved issue with dragonframe where uploaded move would not copy to the end.
- Added eStops
- Playhead accurate and working for keyframable DMX lighting.
RC007_38 (6/20/18) - Playing with logging. Triggering RED Cameras.
- Update Test DD to be silent.
- ID'd issue with max speed, max ramp moves hitting limits, sharp change, updated max ramp value to be 40% for video, min 5%
- looked at throttling of the velocity during move, now allow up to 20% overage compared to 10, globalized variable.
- Added code for SD Card read/write tests.
- Updated Programmed Shots Summary screen to show filename of log file (known issue where this changes after it is written)
- Fixed issue with writes to EEPROM
- Removed several frame variables that were cluttering the code
- Fixed non-reverse bug of the timelapse
- Adding basic triggering code for the RED for both video and SMS. Custom cables are on order. Added Settings for I/O Port: RED Trigger.
RC007_34 (4/26/18) - Updated Move Profiles, moving forward with Dragonframe 4.1
- Added New Dana Dolly Profile called DD Test to manage starts and stops better for heavy cameras. This feathers our starts and stop more to help reduce/remove vibrations some users are seeing with during the starts. Try this out with at least 20% ramp in programmed moves!
- Updated the way M4 reads feel (this is typically for Fz) We updated the reads from the R2/L2 Squeezy triggers to remove deadzones and make the first 50% of the engagement more sensitive. Several users said getting the lens into the right position was tough with the old "curves". We like the feel better now too.
- Added Real-Time Interface for Dragonframe - open to certain customers only. Reach out if you want to test to email@example.com
RC007_28 (2/23/18) Shipped with all new units in 2018-mid 2019
- BUGFIX- Resolved issue of Slider Selection not retaining
- BUGFIX- Continuous mode for Photo Tools--> 360VR works as expected
- BUGFIX - Resolved double fire for external triggers Photo Tools--> 360VR
Known - Issues with this version (updated 4/26)
- Issue when modifying a ping pong shoot that has been stopped. Recommend, fully setting up any new ping pong shots rather than break in and modify to avoid this bug.
- BUG -Fixed Display issue with Photo Tools
- BUG -Fixed Runaway Tilt issue with Photo Tools 360 mode on star
Found Issues with this version (updated 2/22)
- Bug - When selecting ifootage slider from setting menu, motor profiles not retained on power cycle
- Bug- can't start TL360 mode continuous
- Bug-Double fired external triggers from 360 Photo mode.
- Merged Dana Dolly and original ST4 firmware
- Updated Settings menu to reorder and add new options
- Added Screen Flip option
- Added Slider Selection Option – Select your slider – this selection will drive the motor profiles available for selection as well as distance calculations on the display.
- Added i/o port option for API / Dragonframe
- Added AfterRun Placeholder – Future functionality
- Added easy Link to Telemetry 1 and Telemetry 2 screens
- Added Version information
- Programmed Moves - Timelapse - Increased Max Frames for Timelapse to 2880
- Programmed Moves - Video – Increased Max Duration from 1 hour to 12 hours.
- Programmed Moves – First Screen – shows Pan/Tilt and now Slide information live
- Programmed Moves – Multipoint – Increased onboard keyframes from 5 to 9.
- Programmed Moves – Multipoint – Enabled programming without remote in the field. Use only 8Way joystick. When selecting a multipoint move, first click sets Pan/Tilt, second adjust Slide/Focus.
- Programmed Moves - Multipoint –Axis Movetypes – added multipoint Linear as an option – this is very good for focus. Still recommend using multipoint curved for pan and tilt in all scenarios.
- Programmed Moves - Duration/Ramp control is now much improved to prevent users from selecting values that could result in impossible moves (overspeed, accelerating too fast).
- Programmed Moves -Enforce speed throttling during moves to prevent motor overspeed for impossible multipoint moves.
- Programmed Moves - Stopping video moves mid run is more graceful, rather than hard stops.
- GoTo Frames – users can now “bailout” of setting a Target by pressing. Square without locking it down.
- Live Motion – Improvements and changes to many move profiles. Addition of Dana Dolly Turbo mode that is recommended only for 24 volt supplies.
- Live Motion – Rec/Playback. Increased Max record time of live moves to 2 minutes at 24fps (2880 frames).
- Photo Tools – Incorporated Sun Tracking Modes
- BUG Fix – resolved issue of small motor moves when transitioning between certain screens.
- BUG Fix – display issues when moving between menus.
B007_16 as of 08/10/17
- Update Sun Tracking
- Bug fix for suntracking mode early exit from tracking mode after several minutes.
- Added 16 x slew mode
- Now showing degrees and Time Elapased
- Added backlash comp on start to help understand directions its going
B007_14 as of 08/8/17 (not available for download anymore)
- Updated Quiet motor profiles to be less prone to skipping on fast starts with heavy rigs.
- Added Screen Flip Option in Setting's menu - (for those underslingers)
- Added Photo Tools --> Sun Tracking - this is basically using the tilt axis to counteract the rotation of the earth (15 deg/ hour). Slew adjustment at various rates to help push it on track.
- Added Shutter trigger to eMotimo API - G400 series. (eMotimo API is a toolkit to control your emotimo over the serial port and was added in B007_9)
B007_9 as of 06/9/17
- Added Dragonframe support
- Added eMotimo API
- Added 9 Point Moves
- Updated Setting's Menu to be 3 pages long instead of side by side.
- Added new I/O port setting with:Ext Triggering (default), eMotimo API, Dragonframe as options.
Reported Bugs in B007_9:
- 6/22 - Reverse for SMS (Timelapse) doesn't work. Just fires a single shot and returns to main menu. This doesn't seem to be an issue with video moves.
B007_6 as of 5/17/17
- Updated max SMS frames from 1000 to 2000
- Increased record time to 2000 frames (at 24fps, that's about 83 seconds of free-form recording!)
- Turned back on External Triggering
B007_5 as of 5/12/17.
- Backlash compensation on the start of all programmed moves
- Additional Photo Tools Menu with
- Pano/Giga - unchanged, working well
- NEW - 360's - in test - should make it easy to set up single dual and three row 360's by simply pointing to a start point and selecting how many pics you want in a 360. Add rows if you want, and go.
- Note - External Triggering not enabled in B007_5