Plug the 6-Pin cable from the RSI Gimbal Connection into the C/S Port
Power on the RS Gimbal
Power on the SA2.6
Connect the gaming controller (Should be paired already)
Select Programmed Shots for Keyframed Moves or Live Motion for Go-To Frames
Using Programmed Shots
Using Go To Frames
Select Live Motion Menu
Press Right DPad to get to the Circle GoToFrame Menu
Pick a target position using Pan, Tilt, Roll, Focus, Slide and TurnTable
Tip: R1/R2 on the PS4 controller will drive the RS Roll axis additionally the LHat Up/Down controls the TurnTable, also pressing the touchpad button down will zero the Roll axis of the RS
Leave the default for time and ramp
Use the right on the DPad to get to the Triangle GoToFrame Menu
Similarly set a new position
Tip: You can additionally set 2 more GoToFrames on L3 and R3 which are the buttons underneath the thumbsticks (LHat and RHat) of the PS4 controller, Press right on the DPad to continue through the screens
Use the associated button on the PS4 controller to recall any of the four desired presets
Know Issues
Need to switch between Easy Mode and Regular Mode to get to Live Motion. Should we Add ‘Live Motion’ to Easy Menu with only Quiet Fast profile and the 4 Presets for Product Shooting?
Presets can’t be setup without the PS4 Remote
Go to frames there is a 3-5 frame difference between internally driven motors and RS driven motors. This is more noticeable in Macro than in wider shooting. This will be improved with better tuning
There are experimental screens after the GoToFrames setup pages that are not functional yet. They have not been updated to work with the RS
Comments
0 comments
Please sign in to leave a comment.