0 - Conductor SA2.6 Live Control with RS2/3/4 gimbals

Overview:

The Conductor SA2.6 can be controlled by many different interfaces to setup your shots.:

1. Using the gaming remote to control everything 20-50 feet from the unit
2. Long range control via wired Network with Bitfocus Companion / Streamdecks
3. Long range control via wired Network with Skaarhoj Controllers.
4. Using the Gimbal push mode + 8Way joystick for close setups for interviews and product

1 - Using PS4 DualShock/ PS5 DualSense - controls are simple

• Pan - Right Joystick Left/Right
• Tilt - Right Joystick Up/Down
• Roll - L1/R1 Buttons
• Slider (M1) - Left Joystick Left/Right
• TurnTable (M2) - Touchpad Left/Right (Tip: Set your finger on touchpad and roll it left or right for fine control)
• Tilta Focus (N0:1 shown on Motor) or RS Focus - L2/R2 Triggers
• Tilta Zoom (N0:3 shown on Motor) - Left Joystick Up/Down
• Tilta Iris - Not Mapped to Gaming Remotes by Default

4 - Using Gimbal push mode + 8 Way joystick for close setup without the gaming remote.

In guided mode, its easy to set up a shot when close to the Conductor and Gimbal. Your RS gimbal needs to have push mode enabled.  From there on the conductor, you jog left right using the 8 way joystick on the Conductor, then frame up your shot by physically moving the gimbal.  Lock it in by pressing the 8 Way in until it clicks. Then repeat with the end point.

This can provide with a very quick interface for posing the Pan and Tilt of your shot as well as driving a slider (M1)