ST4.3 Kit Options:

We've put quite a bit of thought into how our users will most likely be using their ST4.3. Below, you will find a clear outline of the different ST4.3 kits that eMotimo is currently offering.

Option 1:

This is the most "bare bones" kit we offer.

It includes:

- Spectrum ST4.3 7-axis motion control head (with V-Mount or Gold Mount Battery plate options)

- eMotimo Medium Hard Case with custom foam

-  eMotimo Heavy Duty L-bracket

- AC Power Adapter - 12 volt DC 2.1 Amp

- uSD Card for firmware updates

- Arca compatible 50mm mounting plate on Pan Axis of ST4.3

- PS4 DUALSHOCK®4 wireless controller

This kit is ideal for the shooter who wants to dip their feet into the eMotimo world but does not yet own Tilta Nucleus Motors. This shooter may be a timelapser with no current desire to pull focus or zoom. This is a kit for the shooter who doesn't want to outgrow a standard ST4 (4-axis rig) but also may not quite be ready to start shooting 4+ axis shots.

You can place your order for this kit here.

Option 2:

This is the RUN & GUN Kit

It includes the following:

- Spectrum ST4.3 7-axis motion control head (with V-Mount or Gold Mount Battery plate options)

- Spectrum medium hard case 

- eMotimo Fz (Focus/Zoom) Motor

- eMotimo Heavy Duty L-bracket (camera / Fz motor mounting)

- iFootage Shark Slider with a 30-inch base and 2-foot extension (configurable to 2 and 4-foot lengths)

- iFootage Integration Kit with motor(s) of your choosing (14:1, Direct Drive, or Both)

- uSD Card for firmware updates

- Arca compatible 50mm mounting plate on Pan Axis of ST4.3

- PS4 DUALSHOCK®4 wireless controller

- AC Power Adapter - 12 volt DC 2.1 Amp

- CL-N3, CL-DC0, CL-S2 DSLR camera trigger cables

You can place your order for this kit here.

Option 3:

This is the FZ PRO BUNDLE + DANA DOLLY INTEGRATION Kit

This Kit includes:

- Spectrum ST4.3 7-axis motion control head (with V-Mount or Gold Mount Battery plate options)

- eMotimo Fz (Focus/Zoom) Motor

- PS4 DUALSHOCK®4 wireless controller

- Dana Dolly Integration Kit (Dana Dolly NOT included)
- Universal L-bracket and Forward Back Adjustment Plate & Clamp 100mm Camera Plate

- Large SKB Custom Hard Case/Foam
- uSD Card/Instructions
- Quick Release Clamp for Spectrum mounting to Dana Dolly (requires 3/8”-16 Stud on Dana Dolly carriage – we recommend Half Ball Adapter - NOT included)
- Hi-current 24V DC wall adapter (110-240V AC)
- CL-N3, CL-DC0, CL-S2 DSLR camera trigger cables

You can place your order for this kit here.

Future Kits:

There are a few additional kits that we are considering offering. If you're interested in purchasing any of the following 3 kits were about to discuss, please send a message to help@emotimo.com

Possible Kit 1:

This kit would essentially be the currently offered Run & Gun kit but we would be removing the eMotimo Fz motor and subbing in an eMotimo Turntable. The reason for this is simple. Many ST4.3 users will likely be using their Tilta Nucleus-M Motors for full FIZ control. That's why we would be removing the eMotimo Fz motor. We would be adding the Turntable because our Tilta Motor users will now have a "free" M4 port. This can now be used for a turntable.

That's it. It's a Run & Gun kit but instead of receiving the eMotimo Fz motor, you'd be receiving the eMotimo Turntable.

Possible Kit 2:

For this potential kit, we are going to apply the same concept that we discussed in Potential Kit 1. This is the FZ PRO BUNDLE + DANA DOLLY INTEGRATION Kit (Option 3 from the currently available kits) however instead of receiving the eMotimo Fz motor, you'd be receiving the eMotimo Turntable. 

Possible Kit 3: 

In this final potential kit, we wanted to pull together a MASSIVE bundle. This would be the ideal kit for the shooter who shoots on set using a Dana Dolly, shoots on the go with a Shark Slider, wants the full 7-axis capability but also wants the flexibility of plugging in an eMotimo Fz motor for faster setup/macro work. Additionally, we would be including an eMotimo Turntable for product shooting and a pair of USB i/o cables for use with Dragonframe. Here's the kit breakdown:

- Spectrum ST4.3 7-axis motion control head (with V-Mount or Gold Mount Battery plate options)

- eMotimo Fz (Focus/Zoom) Motor

- PS4 DUALSHOCK®4 wireless controller

- Dana Dolly Integration Kit (Dana Dolly NOT included)
- Universal L-bracket and Forward Back Adjustment Plate & Clamp 100mm Camera Plate

- Large SKB Custom Hard Case/Foam
- uSD Card/Instructions
- Quick Release Clamp for Spectrum mounting to Dana Dolly (requires 3/8”-16 Stud on Dana Dolly carriage – we recommend Half Ball Adapter - NOT included)
- Hi-current 24V DC wall adapter (110-240V AC)
- CL-N3, CL-DC0, CL-S2 DSLR camera trigger cables

- iFootage Shark Slider with a 30-inch base and 2-foot extension (configurable to 2 and 4-foot lengths)

- iFootage Integration Kit with motor both motors

- eMotimo Turntable

- (2) USB i/o Cables